From Barbouri’s Electronics Projects blog:
ATtiny85 breakout with selectable LEDs
While working on the oven heater control circuit for the Voltage Reference Quad Project V2, I needed a small board for testing the PIDheater control without using a serial port or display. I also wanted to use the same board design for multiple projects where I only needed a few I/O pins.
The ATtiny85 (PDIP) breakout board includes an array of 5 low current blue LED’s that are solder jumper selectable for each of the ATtiny85’s I/O pins except for the reset pin.
Barbouri has shared the board on OSH Park: