The first Adafruit Show ‘n Tell of 2020

Joining Adafruit Show ‘n Tell with Helen Leigh was a fun way to start 2020!

Helen embroidered the CircuitPython-powered Serpente board from Arturo at Chaos Communication Congress (36c3):

I showed Linux running on a RISC-V core in the ECP5 FPGA on the Hackaday Supercon badge:

I gave a shout-out to Greg Davill who got Linux booting the OrangeCrab while at 36c3:


Greg’s open hardware OrangeCrab board features the ECP5 FPGA in an Adafruit Feather form factor and is capable of running a RISC-V “soft” core using LiteX.

Find out more about Linux on RISC-V using open source FPGA toolchains in the slides from my 36c3 talk

The first Adafruit Show ‘n Tell of 2020

Hackaday Supercon badge boots Linux using SDRAM cartridge

Jacob Creedon designed an a cartridge board that adds 32MB of SDRAM to the Hackaday Supercon badgeMichael Welling just assembled a version of the PCB made with the OSH Park “After Dark” black FR-4 service:

The addition of SDRAM provides enough memory to boot Linux on a RISC-V soft-core in the ECP5 FPGA on the badge.  Here’s a screenshot of Linux running:

Read more about “Team Linux on Badge” in this Hackaday post:


And finally, receiving the biggest applause was Linux-on-Badge: this team used all the badge hacking tricks in the book. The hardware component was a 32 MiB SDRAM cartridge by [Jacob Creedon]. The default badge SOC FPGA bitstream was entirely replaced in order to support a minimalist Linux. Much of the development was done on [Michael Welling]’s computer, guided by the precedence of a LiteX project putting Linux on the Radiona ULX3S. This is a true success story of Supercon collaboration as the team (including [Drew Fustini], [Tim Ansell], [Sean Cross], and many others) came together and worked late into nights, drawing from the massive body of collective expertise of the community.

Watch the demo during the Badge Hacking ceremony (jump to 17m 35s):


Note: click the “After Dark” checkbox if you want clear solder mask on black substrate


Demo of Linux-on-LiteX booting on the badge:

Wondering what LiteX is?

LiteX is a FPGA design/SoC builder that can be used to build cores, create SoCs and full FPGA designs

Hackaday Supercon badge boots Linux using SDRAM cartridge