Chronio: Arduino-based, low-power smartwatch

fustini, , , , ,

Max.K designed this low-power,  Arduino-based smartwatch:

5353341473017041105

Chronio

Arduino-based 3D-printed Watch. By not including fancy Wifi and BLE connectivity, it gets several months of run time out of a 160mAh button cell. The display is an always-on 96×96 pixel Sharp Memory LCD.

Hardware

  • Microcontroller: Atmega328p with Arduino bootloader
  • Real Time Clock: Maxim DS3231 (<2min per year deviation)
  • Display: 96×96 pixel Sharp Memory LCD (LS013B4DN04)
  • Battery: CR2025 160mAh coin cell
Source: https://hackaday.io/project/12876-chronio
Source: https://hackaday.io/project/12876-chronio
Source: https://hackaday.io/project/12876-chronio
Source: https://hackaday.io/project/12876-chronio
Source: https://hackaday.io/project/12876-chronio

 

Chronio: Arduino-based, low-power smartwatch

Leave a comment