From Mark Smith on the Surf ‘n Circuits blog:
Adding IOT to the Nixie Tube Clock. A clock that provides the estimated time of arrival for up to ten destinations
The ETA Nixie clock is programmed to display the normal time and up to ten different ETA times that are easy to identify and visually stimulating. The current time is displayed for 5 seconds (i.e. 8:41:38 AM), then up to ten different ETA destinations are displayed for three seconds each before the cycle is repeated. The current time displays all six digits including seconds. The ETA locations are numbered and display hours and minutes without seconds helping to distinguish between them. In our house, the ETA to work is ETA number 1 (i.e. 9:07 AM) and the ETA to school is ETA number 2 (i.e. 8:58 AM). Lots of other options are possible with custom programming of the Raspberry Pi to meet your ETA requirements.
surfncircuits has shared the board on OSH Park: